pk10技巧稳赚技巧大全

pk10技巧稳赚技巧大全>> 快速门新闻 >> 『杭州硬质快速门』涡轮硬质快速门的安装方式有哪些 Your present location: Home >> Quick Door News >> "Hangzhou Hard Quick Doors" What are the installation methods of turbo hard quick doors

『Hangzhou Rigid Quick Doors』 What are the installation methods of turbo hard quick doors?

Author: Hangzhou rapid induction door wholesale Published: 2020/1/6 11:33:28



『Hangzhou Rigid Quick Doors』 What are the installation methods of turbo hard quick doors?



What are the installation methods for rigid quick doors?



The conventional installation method of the turbo hard quick door requires no special measures. The left and right side rails are single-section and up-turning industrial doors that can operate normally. It is mainly suitable for openings with a height of at least 600mm .



Push-pull type industrial door installation method that makes the door leaf push and pull in the left and right direction through the guide rail and the transmission system.



,看见名字我们就应该知道,它是主要应用在哪些地方的。 Hard quick door , we should know where we see the name, where it is mainly used.



The roller shutter type drives the movement of the curtain leaf door through the rotation of the reel or the drum, thereby realizing the installation method of the industrial door which is opened and closed.



The high-lift type installs the door-up type industrial door that moves the door leaf vertically through the guide rail for a period and then turns in sections.

Hangzhou hard quick door




Vertical lift is an industrial door installation method that moves the door leaf vertically upwards through the navigation as a whole.



The roller shutter type drives the movement of the curtain leaf door through the rotation of the reel or the drum, thereby realizing the installation method of the industrial door which is opened and closed.



The conventional installation method does not need to take special measures. The left and right side rails are single-section and up-turning industrial doors that can operate normally. They are mainly suitable for openings with a height of at least 600mm.



The hard quick door has a very good control system, which can achieve more convenient operations for manual operation, and achieves the effect of closing the space in a short time.



In a certain environment, it can also ensure that the environment is clean and isolated, and the effect is good in maintaining indoor temperature.



What are the advantages of turbo rigid quick doors?



The characteristic of the hard quick door is that it has a very complete control system. For people in some operating environments, it can achieve a relatively good technical performance control, and instantly realize the overall space in a very short time. A closed job.



,表面为细压制条纹经过阳极氧化加有机着色处理,中间聚氨酯发泡填充,抗风等级可达12级。 The thickness of the aluminum alloy door panel is 40mm . The surface is fine pressed stripes. After anodizing and organic coloring, the polyurethane foam is filled in the middle, and the wind resistance level can reach level 12.

Shaoxing underground garage hard quick door




Good thermal insulation, fast opening speed, 0.8-1.5m per second, which is 3-4 times that of stacked doors.



Hard fast door drive system: The motor drive system adopts Taiwan's original imported motor system, which is small in size, large in function, stable in performance and reliable in function.



Convenient and fast, with fault detection program and fault indication, you can quickly eliminate the cause of the fault and find the fault.



The application of the servo system can make the door body respond to various signals and commands quickly, and make the door body run more smoothly.



The hard quick door is based on the original lifting door and adds a lot of excellent performance, especially his proprietary independent operating system, which makes our operation more convenient and concise, and the speed has been greatly improved. .



Special attention is that when installing this product, its system must be adjusted to a good state, so that it can ensure that there is no trouble during the later use.



Many people know that the quick door cannot move when there is a power failure, but if a fire occurs at this time, what should we do? First of all, pull down the brake cable, remember to disconnect the motor from the brake;



This is followed by a snap-in joystick. When snapping into the rocker, be sure to align the connector and the motor; the door is down.



What should I do if the hard quick door motor is thermally protected?



According to the years of experience of hard quick door manufacturers, the failure of general hard quick doors is mainly caused by the following problems.



The hard quick door brakes slip, the hand zipper bar cannot pull, the hard quick door fails to drop by its own weight, and the motor does not start.



When the hard quick door brake slips, use gasoline to clean the oil on the door brake pads; replace the spring because the pressure of the compression spring is reduced; reinstall the electromagnet to the correct position.



When the hand zip of the hard quick door cannot be filled, the chain is straightened, because the surrounding chain may block the cross groove; if the solenoid fastener is loosened, it can be fastened again.



If it is the failure of the hard quick door due to the weight drop, replace the manual pull rod, because the manual pull rod of the hard quick door is deformed; reduce the gap between the manual pull rod and the washer; if it is because the motor lubrication of the gearbox fails, it will The grease has changed.



When the motor does not start, you can troubleshoot from these aspects.



Disconnect the circuit and check the wires;



Check the running capacitor, if it is damaged, replace it;



Check the motor's overheating protector and replace it if the overheating protection fails;



The treatment method for the brake sticking is to pull the manual chain a few times;



跟打磨触点是一个正确的选择哟; When the normally closed contact of the limit switch does not work, it is a correct choice to replace the limit switch and the polished contact;



If the relay coil is broken or oxidized, if it is contaminated, the processing method is to replace the relay or polish the contacts;



Reduce the temperature of the motor. When the motor is running for too long and the thermal protection is disconnected, it will not start.



Replace the bridge rectifier and electromagnetic coil when the bridge rectifier is broken or the brake is stuck, and the electric coil is broken.



In general, the reasons for the failure of hard quick doors may be intricate, but it is also safe to understand the reasons for the failure.



造成更大的伤害哟。 When a fault occurs, if you can't repair it by yourself, please find a professional to repair it. Avoid your own improper operation, which will cause greater damage to the hard quick door .

CONTACT US
Copyright: Chengdu Longsheng Door Industry Co., Ltd. Telephone: 13940183063
Contact: Manager Han Website: http://iilpipes.com
see more
Tel: 13940183063 (Do not disturb the media) Contact: Manager Han Copyright: Chengdu Longsheng Door Industry Co., Ltd.
Baidu Map - Site Map-